Configuring qDynamicLayout

If a Web Part is hidden or closed, you cannot add it to qDynamicLayout.

If you delete qDynamicLayout, only the qDynamicLayout container is deleted, the Web Parts contained within it are not.

You cannot configure the View Settings section until you have added a Web Part to a tab in qDynamicLayout.

To configure qDynamicLayout

1	Add the qDynamicLayout Web Part to your page.

2	Open ezEdit.

The Primary Content page opens by default.

3	Configure each element as needed and click OK.

4	If needed, configure the elements in the other tabs.

5	When done configuring each tab, click OK.

You do not have to add a Web Part to a tab right away. You can add one later or add more Web Parts to the same tab.

To add a Web Part later or add more Web Parts to the same tab

1	From Site Actions, select Edit Page.

2	Select Add a Web Part.

3	Select a Web Part and click Add.

4	From qDynamicLayout Web Part, select ezEdit.

5	From View Settings section, select Edit.

6	Select the Web Part you just added.

7	Select the Tab ID for the Web Part.

8

Click OK.

To configure a Web Part within a qDynamicLayout Web Part

1	From Site Actions, select Edit Page.

2	From qDynamicLayout Web Part, select a tab.

3	From the tab, select ezEdit.

4	Configure and save the Web Part.